Poly(acrylamide)-co-poly(hydroxyethyl)methacrylate-co-poly(cyclohexyl methacrylate) hydrogel platform for stability, storage and biocatalytic applications of urease.

In our present work, an explicit crosslinked thermo-responsive hydrogel platform has been developed, by using polyacrylamide (PAAm), poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(cyclohexyl methacrylate) (PCHMA), and then coupled with urease to yield bioconjugates (BCs). Synergic effect of these polymer units provides thermoresponsive nature, optimum crosslinking with desired swelling behaviour, and stability and improved catalytic to Urease in the resultant BCs. Synthesis of the terpolymer has been achieved by employing HEMA (monomer as well as crosslinker), instead of using the conventional crosslinkers, through free radical solution polymerization technique. Various grades of TRPUBs have been fabricated by varying HEMA and CHMA contents while keeping fixed amounts of AAm. Further, the structural analysis of BCs has been done by fourier transform infra-red spectroscopic study and their thermal stabilities have been studied by thermogravimetric analysis. Urea present in TRPUBs has beenanalysed for its hydrolysis atdifferent temperatures viz., 25 °C, 45 °C and 70 °C. Further, the effect of crosslinking, temperature and reaction time on catalytic activities of TRPUBs has been studied. TRPUBs grades have showna maximum swelling capacity up to 5200 %; excellent catalytic activity even at 70 °C; and 85 % activity retention after 18 days storage in buffer medium.

Long-term in vivo degradation and biocompatibility of degradable pHEMA hydrogels containing graphene oxide.

Developing biocompatible, non-fouling and biodegradable hydrogels for blood-contacting devices remains a demanding challenge. Such materials should promote natural healing, prevent clotting, and undergo controlled degradation. This study evaluates the biocompatibility and biodegradation of degradable poly(2-hydroxyethyl methacrylate) (d-pHEMA) hydrogels with or without reinforcement with oxidized few-layer graphene (d-pHEMA/M5ox) in a long term implantation in rats, assessing non-desired side-effects (irritation, chronic toxicity, immune response). Subcutaneous implantation over 6 months revealed degradation of both hydrogels, despite slower for d-pHEMA/M5ox, with degradation products found in intracellular vesicles. No inflammation nor infection at implantation areas were observed, and no histopathological findings were detected in parenchymal organs. Immunohistochemistry confirmed d-pHEMA and d-pHEMA/M5ox highly anti-adhesiveness. Gene expression of macrophages markers revealed presence of both M1 and M2 macrophages at all timepoints. M1/M2 profile after 6 months reveals an anti-inflammatory environment, suggesting no chronic inflammation, as also demonstrated by cytokines (IL-α, TNF-α and IL-10) analysis. Overall, modification of pHEMA towards a degradable material was successfully achieved without evoking a loss of its inherent properties, specially its anti-adhesiveness and biocompatibility. Therefore, these hydrogels hold potential as blank-slate for further modifications that promote cellular adhesion/proliferation for tissue engineering applications, namely for designing blood contacting devices with different load bearing requirements. STATEMENT OF SIGNIFICANCE: Biocompatibility, tunable biodegradation kinetics, and suitable immune response with lack of chronic toxicity and irritation, are key features in degradable blood contact devices that demand long-term exposure. We herein evaluate the 6-month in vivo performance of a degradable and hemocompatible anti-adhesive hydrogel based in pHEMA, and its mechanically reinforced formulation with few-layer graphene oxide. This subcutaneous implantation in a rat model, shows gradual degradation with progressive changes in material morphology, and no evidence of local inflammation in surrounding tissue, neither signs of inflammation or adverse reactions in systemic organs, suggesting biocompatibility of degradation products. Such hydrogels exhibit great potential as a blank slate for tissue engineering applications, including for blood contact, where cues for specific cells can be incorporated.

Enhanced invertase binding from baker's yeast via cryogels included boronic acids.

Invertase, an industrially significant glycoenzyme, was purified from baker's yeast using poly (2-Hydroxyethyl methacrylate) [PHema-Pba] cryogels functionalized with boronic acid. At subzero temperatures, PHema-Pba cryogels were synthesized and characterized using swelling tests, scanning electron microscopy, and Fourier-transform infrared spectroscopy. The surface area of the PHema-Pba cryogels was 14 m2/g with a swelling ratio of 88.3% and macroporosity of 72%. The interconnected macropores of PHema-Pba cryogels were shown via scanning electron microscopy. Invertase binding capacity of PHema-Pba cryogel was evaluated by binding studies in different pH, temperature, and interaction time conditions and the maximum Invertase binding of PHema-Pba cryogel was found as 15.2 mg/g. and 23.7 fold Invertase purification was achieved from baker's yeast using PHema-Pba cryogels. The results show that PHema-Pba cryogels have high Invertase binding capacity and may be used as an alternative method for enzyme purification via boronate affinity systems.

Modeling of the PHEMA-gelatin scaffold enriched with graphene oxide utilizing finite element method for bone tissue engineering.

The development of computer-aided facilities has contributed to the optimization of tissue engineering techniques due to the reduction in necessary practical assessments and the removal of animal or human-related ethical issues. Herein, a bone scaffold based on poly (2-hydroxyethyl methacrylate) (PHEMA), gelatin and graphene oxide (GO), was simulated by SOLIDWORKS and ABAQUS under a normal compression force using finite element method (FEM). Concerning the mechanotransduction impact, GO could support the stability of the structure and reduce the possibility of the failure resulting in the integrity and durability of the scaffold efficiency which would be beneficial for osteogenic differentiation.

Synthesis and Properties of Polyol Copolymer with Alternating Methacrylate-Vinyl Ether Backbone.

Radical polymerization of a tailored diphenylsilane-bridged bi-functional monomer consisting of methacrylate and vinyl ether moieties is conducted in diluted monomer concentration, in which both two moieties are consumed at almost the same rate despite their huge difference in monomer reactivity ratio. The vinyl ether content in the backbone is quantified as 45% by 1 H NMR after removal of the silane bridge. Since vinyl ether alone cannot be polymerized in such radical polymerization, it should be incorporated in an alternating fashion with methacrylate into the copolymer main chain. The cleavage of silane bridge also yields a series of polyol materials composed of ethylene glycol monovinyl ether (EGVE) and hydroxyethyl methacrylate (HEMA), and the EGVE content in the backbone can be regulated from 45% to 18% by increasing the bi-functional monomer concentration. Interestingly, although containing more than 50% HEMA units, the alternating copolymer exhibits new properties totally different from poly(HEMA), but more similar to poly(EGVE), e.g., good water solubility and a markedly low glass transition temperature (Tg ) of -31 °C, which is attributed to the major HEMA-EGVE repeating unit that replaced HEMA-HEMA consecutive segments so that the properties of poly(HEMA) such as 95 °C Tg are completely altered.

A mechanically robust and stable estradiol-loaded PHEMA-based hydrogel barrier for intrauterine adhesion treatment.

Estrogen combined with physical barrier therapy may be a prospective method to repair a damaged endometrium and prevent postsurgical re-adhesion in the treatment of intrauterine adhesions (IUAs), but there lacks a suitable scaffold with good biocompatibility, appropriate mechanical properties, and drug-releasing kinetics. Herein, a mechanically robust and stable barrier based on the poly(hydroxyethyl methacrylate) (PHEMA) hydrogel combined with estradiol-loaded mesoporous silica is designed. The network is formed by covalent bonds and noncovalent coordination bonds, which endow the hydrogel with superior mechanical properties to most reported PHEMA-based hydrogels. Meanwhile, the covalent bonds impart excellent stability to the hydrogel, which maintains its structure and mechanical properties in a simulated uterine fluid for 30 days. The excellent mechanical properties and stability are comparable to those of a typical barrier material intrauterine device (IUD), enabling the hydrogel to be retained in the uterus and removed intact like an IUD. In vitro and in vivo experiments show that the hydrogel possesses good biocompatibility similar to pure PHEMA hydrogels. In addition, the hydrogel releases estradiol continuously and stably, and exhibits a good therapeutic effect in promoting the proliferation of endometrial cells and inhibiting the progression of fibrosis. Therefore, the combinational advantages make the present hydrogel very promising in IUA treatment.

Poly(2-hydroxyethyl methacrylate-co-quaternary ammonium salt chitosan) hydrogel: A potential contact lens material with tear protein deposition resistance and antimicrobial activity.

Tear protein deposition resistance and antimicrobial property are two challenges of conventional poly(2-hydroxyethyl methacrylate) (pHEMA) contact lenses. In this work, we developed a poly(2-hydroxyethyl methacrylate-co-quaternary ammonium salt chitosan) hydrogel, named as p(HEMA-co-mHACC) hydrogel, using acryloyl HACC (mHACC) as a macromolecular crosslinker. With increasing the acryloyl substitution degree (14-29%) or mHACC content (2-11%), the hydrogel showed an enhanced tensile strength (432-986 kPa) and Young's modulus (360-1158 kPa), a decreased elongation at break (242-84%), and an increased visible light transmittance (0-95%). At an optimal acryloyl substitution degree of 26%, with the increase of mHACC content from 2% to 11%, p(HEMA-co-mHACC) hydrogel presented a decreased water contact angle from 84.6 to 55.3 degree, an increased equilibrium water content from 38% to 45%, and an enhanced oxygen permeability from 8.5 to 13.5 barrer. Due to the enhancement in surface hydrophilicity and electropositivity, p(HEMA-co-mHACC) hydrogel remarkably reduced the deposition of lysozyme, but little affected the adsorption of BSA, depending on the hydrophilic/hydrophobic and electrostatic interactions. The antimicrobial test against Staphylococcus aureus and Escherichia coli showed that p(HEMA-co-mHACC) hydrogel presented an 8-32 times higher germicidal ability than pHEMA hydrogel, indicative of a better antimicrobial activity. The in vitro cell culture of mouse NIH3T3 fibroblasts and immortalized human keratinocytes showed that p(HEMA-co-mHACC) hydrogel was non-toxic. Thus, p(HEMA-co-mHACC) hydrogel with tear protein deposition resistance and antimicrobial activity is a potential candidate for contact lenses.

Toughened Hydrogels for 3D Printing of Soft Auxetic Structures.

Materials with negative Poisson's ratio have attracted considerable attention and offered high potential applications as biomedical devices due to their ability to expand in every direction when stretched. Although negative Poisson's ratio has been obtained in various base materials such as metals and polymers, there are very limited works on hydrogels due to their intrinsic brittleness. Herein, we report the use of methacrylated cellulose nanocrystals (CNCMAs) as a macro-cross-linking agent in poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels for 3D printing of auxetic structures. Our developed CNCMA-pHEMA hydrogels exhibit significant improvements in mechanical properties, which is attributed to the coexistence of multiple chemical and physical interactions between the pHEMA and CNCMAs. Structures printed by using CNCMA-pHEMA hydrogels show auxetic behavior with greatly enhanced toughness and stretchability compared to the hydrogel with a traditional cross-linking agent. Such strong and tough auxetic hydrogels would contribute toward establishing advanced flexible implantable devices such as biodegradable oesophageal self-expandable stents.

Replica-mold nanopatterned PHEMA hydrogel surfaces for ophthalmic applications.

Biomimicking native tissues and organs require the development of advanced hydrogels. The patterning of hydrogel surfaces may enhance the cellular functionality and therapeutic efficacy of implants. For example, nanopatterning of the intraocular lens (IOL) surface can suppress the upregulation of cytoskeleton proteins (actin and actinin) within the cells in contact with the IOL surface and, hence, prevent secondary cataracts causing blurry or opaque vision. Here we introduce a fast and efficient method for fabricating arrays consisting of millions of individual nanostructures on the hydrogel surface. In particular, we have prepared the randomly distributed nanopillars on poly(2-hydroxyethyl methacrylate) hydrogel using replica molding and show that the number, shape, and arrangement of nanostructures are fully adjustable. Characterization by atomic force microscopy revealed that all nanopillars were of similar shape, narrow size distribution, and without significant defects. In imprint lithography, choosing the appropriate hydrogel composition is critical. As hydrogels with imprinted nanostructures mimic the natural cell environment, they can find applications in fundamental cell biology research, e.g., they can tune cell attachment and inhibit or promote cell clustering by a specific arrangement of protrusive nanostructures on the hydrogel surface.

Phenylboronic acid modified hydrogel materials and their potential for use in contact lens based drug delivery.

The use of hydrogel-based contact lens materials holds promise for ophthalmic drug delivery by increasing drug residence time, improving drug bioavailability, reducing administration frequency, and enhancing special site targeting. Issues such as ease of manufacturing, lens comfort and appropriate release kinetics must be considered. Furthermore, the high water content of hydrogel materials can result in rapid and poorly controlled release kinetics. Herein, we modified common hydrogels used in contact lens manufacturing with phenylboronic acid (PBA). PBA addresses these material design issues since boronate esters are easily formed when boron acid and diols interact, opening up a pathway for simple modification of the model lens materials with saccharide based wetting agents. The wetting agents have the potential to improve lens comfort. Furthermore, the hydrophobicity of PBA and the presence of diols can be useful to help control drug release kinetics. In this work, polymerizable 3-(acrylamido)phenylboronic acid (APBA) was synthesized and incorporated into various hydrogels used in contact lens applications, including poly(2-hydroxyethylmethacrylate) (PHEMA), polyvinylpyrrolidone (PVP) and poly(N,N-dimethyl acrylamide) (PDMA) using UV induced free radical polymerization. The APBA structure and its incorporation into the hydrogel materials were confirmed by NMR and FTIR. The materials were shown to interact with and bind wetting agents such as hyaluronan (HA) and hydroxypropyl guar (HPG) by simple soaking in an aqueous solution. The equilibrium water content of the modified materials was characterized, demonstrating that most materials are still in the appropriate range after the introduction of the hydrophobic PBA. The release of three model ophthalmic drugs with varying hydrophilicity, atropine, atropine sulfate and dexamethasone, was examined. The presence of PBA in the materials was found to promote sustained drug release due to its hydrophobic nature. The results suggest that the modification of the materials with PBA was able to not only provide a mucoadhesive property that enhanced wetting agent interactions with the materials, but had the potential to alter drug release. Thus, the modification of contact lens materials with mucoadhesive functionality may be useful in the design of hydrogel contact lenses for ophthalmic drug release and wetting agent binding.

Preparation of Staphylococcal Protein A Imprinted Supermacroporous Cryogel Beads.

Protein A is the most commonly used ligand in IgG purification due to its specific binding to the Fc receptor of most immunoglobulins, making it commercially important. Molecular imprinting is a method based on the selective recognition of various molecules. Molecular imprinted polymers are materials that are easy to prepare, durable, cheap and have molecular recognition capability. Cryogels are prepared by radical polymerization in a partially frozen environment. The unique structure of cryogels combined with osmotic, chemical and mechanical stability make them attractive chromatography matrices for a variety of biological compounds/specimens (plasmids, pathogens, cells). In this protocol, protein A imprinted supermacroporous poly(2-hydroxyethyl methacrylate) cryogels were prepared in spherical form for protein A purification. The characterization of the prepared cryogels were made by swelling test, scanning electron microscopy (SEM), Fourier transform infrared spectrophotometer (FTIR), and Brunauer-Emmett-Teller (BET) surface area analysis. After characterization, optimum conditions for protein A adsorption were determined in the batch system. The maximum protein A adsorption capacity was determined after optimization of the imprinted cryogels. Protein A relative selectivity coefficients of imprinted cryogels were examined for both Fc and protein G. Protein A was isolated from the bacterial cell wall using fast performance liquid chromatography (FPLC). The separated protein A was determined by sodium dodecyl sulfate gel electrophoresis (SDS-PAGE). In the last stage, the reusability of the cryogel was examined.

Brush-Structured Chitosan/PolyHEMA with Thymine and Its Synergistic Effect on the Specific Interaction with ssDNA and Cellular Uptake.

Cationic polymers are known to attach on an anionic cell surface and favor gene transportation/transfection into the cells. However, when the positive charges accumulate, they tend to cause cell damage and delivery failure. Chitosan (CS) is a potential cationic bio-derived polymer whose chemical structures can be modified to fine-tune the charges as well as the add-on functions. The present work demonstrates (i) the decoration of a nucleic acid sequence-like brush structure on CS to allow the specific interaction with DNA and (ii) delivery into the cell. By simply applying mercaptoacetic acid as the chain transfer agent, the grafting of poly(hydroxyethyl methacrylate) (PHEMA) containing Thy (P(HEMA-Thy)) on CS is possible. The brush-like P(HEMA-Thy) leads Thy moieties to be in sequences. The Thy sequences perform as poly[T] for the specific interaction with ssDNA. The synergistic effect of CS and Thy sequences, i.e., electrostatic and base pairing interactions, results in an effective and efficient binding with ssDNA as well as significant delivery, especially in cellular uptake and cell viability. The use of CS in combination with Thy sequences in brush-like structures on CS is a model for other polysaccharides to be conjugated with the as-designed nucleic acid sequences for potential gene delivery.

Preparation of colloidal nanoparticles PVA-PHEMA from hydrolysis of copolymers of PVAc-PHEMA as anticancer drug carriers.

The novel pH-responsive polymer nanoparticles have been widely used for drug delivery and cancer therapy. The pH-sensitive nanoparticles include chemical structures that can accept or donate protons in response to an environmental pH change. Polybases which mostly contain alkaline groups such as amines and hydroxy, accept protons at low pH and are neutral at higher pH values. This study aimed to prepare pH-sensitive colloidal amphiphilic poly(vinyl alcohol-2-hydroxyethyl methacrylate) (PVA-PHEMA) copolymers in cancer therapy applications. For this purpose, poly(vinyl acetate-2-hydroxyethyl methacrylate) (PVAc-PHEMA) copolymer nanoparticles were synthesized in different polymerization medium fractions from water and methanol and different monomer feed concentration. Then acetate groups were hydrolyzed, and the PHEMA-PVA nanoparticles were synthesized. The nanoparticles were further characterized using dynamic light scattering, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis to identify the structural and morphological changes. The Methotrexate (MTX) was loaded into the nanoparticles, and drug release kinetics were evaluated. The results confirmed that PHEMA-PVA copolymeric nanoparticles could be favorably used in cancer therapy.

Spatial distribution of single guest molecules along thickness of thin films of poly(2-hydroxyethyl acrylate).

We have investigated three-dimensional distribution and diffusion behaviors of single guest dyes in 1-µm thick films of poly(2-hydroxyethyl acrylate) (PHEA) by using astigmatism imaging method. Perylene diimide derivative (BP-PDI) in the PHEA films localized along the Z-axis at ca. Z = 600-700 nm distant from the interface (Z = 0) between PHEA and glass substrate. This Z-localization was not observed in different polymer films of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), and polystyrene (PSt). Because the glass transition temperature of the PHEA is lower than the room temperature, BP-PDI in the PHEA films exhibited Brownian motion, normal diffusion on the XY plane and confined motion along the Z-direction. For elucidating the mechanism of the peculiar localization of the guest dyes along film thickness in the PHEA films, we measured diffusion behaviors of different dyes, R6G and Atto 488, in 1-µm thick PHEA films, obtaining result that the Z-distributions of the dyes were overall similar to that of BP-PDI. The result indicates that the Z-localization of the guest dyes should be ascribed not to the interaction between glass surface and guest dye but mainly to the Z-dependent property of the PHEA film. Indeed, the lateral diffusion coefficients of the guest dyes depended on their Z-positions.

Photonic Hydrogels for Synergistic Visual Bacterial Detection and On-Site Photothermal Disinfection.

Rapid and sensitive diagnostics in the early stage of bacterial infection and immediate treatment play critical roles in the control of infectious diseases. However, it remains challenging to develop integrated systems with both rapid detection of bacterial infection and timely on-demand disinfection ability. Herein, we demonstrate a photonic hydrogel platform integrating visual diagnosis and on-site photothermal disinfection by incorporating Fe3O4@C nanoparticles into a poly(hydroxyethyl methacrylate)-co-polyacrylamide (PHEMA-co-PAAm) matrix. In vitro experiments demonstrate that such a hydrogel can respond to pH variation caused by bacterial metabolism and generate the corresponding color changes to realize naked-eye observation. Meanwhile, its excellent photothermal conversion ability enables it to effectively kill bacteria by destroying cell membranes under near-infrared irradiation. Moreover, the pigskin infection wound model also verifies the bacterial detection performance and disinfection ability of the hydrogel in vivo. Our strategy demonstrates a new approach for visual diagnosis and treatment of bacterial infections.

A novel Y-shaped photoiniferter used for the construction of polydimethylsiloxane surfaces with antibacterial and antifouling properties.

The simultaneous introduction of two new functionalities into the same polymeric substrate under mild reaction conditions is an interesting and important topic. Herein, dual-functional polydimethylsiloxane (PDMS) surfaces with antibacterial and antifouling properties were conveniently developed via a novel Y-shaped asymmetric dual-functional photoiniferter (Y-iniferter). The Y-iniferter was initially immobilized onto the PDMS surface by radical coupling under visible light irradiation. Afterwards, poly(2-hydroxyethyl methacrylate) (PHEMA) brushes and antibacterial ionic liquid (IL) fragments were simultaneously immobilized on the Y-iniferter-modified PDMS surfaces by combining the sulfur(VI)-fluoride exchange (SuFEx) click reaction and UV-photoinitiated polymerization. Experiments using E. coli as a model bacterium demonstrated that the modified PDMS surfaces had both the expected antibacterial properties of the IL fragments and the excellent antifouling properties of PHEMA brushes. Furthermore, the cytotoxicity of the modified PDMS surfaces to L929 cells was examined in vitro with a CCK-8 assay, which showed that the modified surfaces maintained excellent cytocompatibility. Briefly, this strategy of constructing an antibacterial and antifouling PDMS surface has the advantages of simplicity and convenience and might inspire the construction of diverse dual-functional surfaces by utilizing PDMS more effectively.

A convergent synthetic platform for dual anticancer drugs functionalized by reduced graphene nanocomposite delivery for hepatocellular cancer.

Hepatocellular carcinoma (HCC) is widespread cancer with a high degree of morbidity and mortality in individuals worldwide and a serious concern for its resistance to present chemotherapy drugs. In this investigation, the combination of cisplatin (CPT) and metformin (MET) to kill the HepG2 and caco-2 cells was developed into a new pH-responding magnetic nanocomposite based on reduced graphene oxide. Polyhydroxyethyl methacrylic (PHEA) was then linked employing grafting from approach to the reduced graphene oxide by ATRP polymerization (Fe3O4@rGO-G-PSEA). FT-IR, SEM, XRD, DLS, and TGA analyses evaluated physicochemical characteristics of the nanocomposite. In addition, the cellular uptake property of the nanocomposites was examined by the HepG2 cells. The outcomes of cell viability results indicate that the nanoparticles loaded with MET&CPT showed the lowest concentration rate of HepG2 and Caco-2 cells compared to the drug-loaded single nanocomposite groups and free drugs. The histological analysis has demonstrated relatively safe and does not produce different stress such as swelling and inflammation of the mice organs. Our results show the enhancement in cytotoxicity in HepG2 and Cocoa-2 cells by MET and CPT graphene oxide-based nanocomposite by promoting apoptotic response. Moreover, Fe3O4@rGO-G-PSEA showed potent in vivo antitumor efficacy but showed no adverse toxicity to normal tissues. Together, this study can provide insight into how surface embellishment may tune these nanocomposites' tumor specificity and provide the basis for developing anticancer efficacy.

Dual-Functional Surfaces Based on an Antifouling Polymer and a Natural Antibiofilm Molecule: Prevention of Biofilm Formation without Using Biocides.

Pathogenic biofilms formed on the surfaces of implantable medical devices and materials pose an urgent global healthcare problem. Although conventional antibacterial surfaces based on bacteria-repelling or bacteria-killing strategies can delay biofilm formation to some extent, they usually fail in long-term applications, and it remains challenging to eradicate recalcitrant biofilms once they are established and mature. From the viewpoint of microbiology, a promising strategy may be to target the middle stage of biofilm formation including the main biological processes involved in biofilm development. In this work, a dual-functional antibiofilm surface is developed based on copolymer brushes of 2-hydroxyethyl methacrylate (HEMA) and 3-(acrylamido)phenylboronic acid (APBA), with quercetin (Qe, a natural antibiofilm molecule) incorporated via acid-responsive boronate ester bonds. Due to the antifouling properties of the hydrophilic poly(HEMA) component, the resulting surface is able to suppress bacterial adhesion and aggregation in the early stages of contact. A few bacteria are eventually able to break through the protection of the anti-adhesion layer leading to bacterial colonization. In response to the resulting decrease in the pH of the microenvironment, the surface could then release Qe to interfere with the microbiological processes related to biofilm formation. Compared to bactericidal and anti-adhesive surfaces, this dual-functional surface showed significantly improved antibiofilm performance to prevent biofilm formation involving both Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus for up to 3 days. In addition, both the copolymer and Qe are negligibly cytotoxic, thereby avoiding possible harmful effects on adjacent normal cells and the risk of bacterial resistance. This dual-functional design approach addresses the different stages of biofilm formation, and (in accordance with the growth process of the biofilm) allows sequential activation of the functions without compromising the viability of adjacent normal cells. A simple and reliable solution may thus be provided to the problems associated with biofilms on surfaces in various biomedical applications.

Tribological Properties of Micropored Poly(2-hydroxyethyl methacrylate) Hydrogels in a Biomimetic Aqueous Environment.

The applications of hydrogels in tissue engineering as implants have rapidly grown in the last decade. However, the tribological properties of hydrogels under physiologically relevant conditions, especially those of textured hydrogels, have remained largely unknown due to the complexity of their mechanical and chemical properties. In this study, we experimentally investigated the tribological properties of micopored poly(2-hydroxyethyl methacrylate) (pHEMA) with the lateral pore dimensions varied compared to untextured pHEMA, the most commonly used hydrogel in ophthalmology, under physiologically relevant conditions. The pHEMA specimens were slid against a smooth glass curve under varying loads (6-60 mN, leading to an average contact pressure of 10-21 kPa) and sliding speeds (1-10 mm/s) in phosphate-buffered saline (pH 7.4) at 33 °C to mimic the physiological conditions in human eyes. At relatively low loads and sliding speeds (e.g., 6 mN and 1 mm/s), the micopored pHEMA did not reduce the dissipated frictional energy significantly. However, at relatively high loads and sliding speeds (e.g., 60 mN and 100 mm/s), the micopored pHEMA resulted in significantly lower frictional energy (reduced by up to 68%) dissipation than the untextured pHEMA. The effect was more pronounced with the micropores with smaller dimensions. These are attributed to the greater amount and retentivity of the interfacial fluid supported by the free water squeezed out of the micropores with the smaller dimensions under the higher load and sliding speed. These results suggest that the use of micropore texturing on hydrogels in practice, such as for ocular applications, can be leveraged to reduce friction and wear under physiological conditions and hence lower the chance of inflammation near eye implants or keratoprosthesis.

pHEMA: An Overview for Biomedical Applications.

Poly(2-hydroxyethyl methacrylate) (pHEMA) as a biomaterial with excellent biocompatibility and cytocompatibility elicits a minimal immunological response from host tissue making it desirable for different biomedical applications. This article seeks to provide an in-depth overview of the properties and biomedical applications of pHEMA for bone tissue regeneration, wound healing, cancer therapy (stimuli and non-stimuli responsive systems), and ophthalmic applications (contact lenses and ocular drug delivery). As this polymer has been widely applied in ophthalmic applications, a specific consideration has been devoted to this field. Pure pHEMA does not possess antimicrobial properties and the site where the biomedical device is employed may be susceptible to microbial infections. Therefore, antimicrobial strategies such as the use of silver nanoparticles, antibiotics, and antimicrobial agents can be utilized to protect against infections. Therefore, the antimicrobial strategies besides the drug delivery applications of pHEMA were covered. With continuous research and advancement in science and technology, the outlook of pHEMA is promising as it will most certainly be utilized in more biomedical applications in the near future. The aim of this review was to bring together state-of-the-art research on pHEMA and their applications.